Now many factory workshops have installed industrial air cooler to solve the problem of sultry workshops caused by hot summer weather. The hot weather can lead to very low productivity of the workers in the workshop. The industrial air cooler can solve the problem of cooling and ventilation in the workshop at a very low cost. It can cool and ventilate an area of ​​100 square meters for 1 hour, and only needs 1 kWh of electricity. So it is loved by many companies. But it is precisely because the cooling cost of industrial air coolers is very low. Under the same conditions of the same area, the cooling cost of industrial air coolers is lower than that of fans. But it is precisely because of this reason that many companies have doubts about its cooling effect.

Movable Stand Up Industrial Air Cooler With 80L Water Tank


Is such a low power consumption a bad cooling effect? ​​In fact, this is not the case. The cooling effect of industrial air coolers The effect can be quickly reduced by 4-10 degrees, and at the same time of cooling, it can also have the effect of ventilation. The reason why the industrial air cooler can save electricity is because of its special cooling method. The industrial air cooler is different from the traditional air conditioner. It uses the principle of water evaporation and heat absorption to cool down and ventilate, just like standing in a hot weather. The place with water will feel cooler, because when the water evaporates, it absorbs the heat in the air, so the temperature will be lower. There are four wet curtains in the industrial air cooler, which can increase the contact area between air and water and make the cooling effect better.

Industrial air cooler cooling effect:

1. The larger the air volume, the faster the number of air changes. The indoor hot air is driven out by the cool air of the air cooler before it is generated.

2. The greater the density of the water curtain, the more uniform the water will be distributed by the water pump during operation, and the more thoroughly and cooler the air filtered by the air cooler will be.

3. The cooler the water temperature, the cooler the wind blowing from the cooler and the higher the cooling effect.

Air supply form of cooling fan: The cooling fan adopts axial flow ventilation technology. When the axial flow fan is working, the impeller of the power machine drives the cooling fan to rotate in the cylindrical casing, the gas enters from the collector, obtains energy through the impeller, increases the pressure and speed, and then discharges in the axial direction. There are three types of axial flow fans: vertical, horizontal and inclined. The diameter of the small impeller is only about 100 mm, and the large one can reach more than 20 meters.

Axial-flow air coolers, large-scale low-pressure axial-flow air coolers are composed of components such as impellers, casings and collectors, and are usually installed on the walls or ceilings of buildings; large-scale high-pressure axial-flow fans are composed of collectors, impellers, streamlines It is composed of body, casing, diffuser and transmission parts. The blades are evenly arranged on the hub, and the number is generally 2 to 24. The more blades, the higher the wind pressure; the blade installation angle is generally 10 ° ~ 45 °, the larger the installation angle, the greater the air volume and wind pressure. The main parts of the axial flow cooler are mostly welded or riveted with steel plates.