One of the most effective ways to use an air cooler is to provide it with legal ventilation in a room. A normal misjudgment is that an AC-like air cooler can work effectively if placed in an enclosed area. That is wrong. Home air coolers work based on evaporation, by blowing hot air over a cooling pad that has been splashed with water. After that, perfect airflow is the basis for its cooling. Air cooler cross ventilation: The best area to place an air cooler is directly in front of a window. The air is hotter, evaporates faster, and the air from the fan is cooler.

It is also crucial to have good ventilation in the space to remove moisture. To do this, you really want to open windows in the room. Be careful not to open them too far, as this will only cause the room temperature to rise. You can test cooling measures by changing the window slightly. A more successful way to increase cooling capacity is to put ice in the water in the tank. Many people have tried it with their coolers so far. In fact, some coolers also come with dedicated ice compartments. Adding ice to the water cools the pads, allowing cold air to pass through them. Still, it only works if you're very close to the cooler. But adding ice won't help lower the room's temperature or humidity for a long time.

Adding excess ice can also slow down the evaporation cycle, affecting the productivity of the air cooler. This makes it very important to be aware of when to put ice in the cooler. Adding ice cubes ends up being more feasible when you're managing extremely high temperatures. Air cooler verification must be done before using it in summer. Over time, they collect dust and pollen. You can use a brush to clean the cooling pad once a week. If a lot of dust powder has accumulated, your best bet is to replace them. One way to guarantee instant cooling is to have the pump run while filling the tank with water.

The pump window air cooler will run the water through the cooling pads, allowing them to splash ahead of time. When the tank is full, you can run the fan. This helps the cooler cool the air when you turn it on. There are a few different things you can do to increase the efficiency of your air cooler. It could very well be as simple as closing the curtains in your area to keep heat away from entering the room or turning off lights and other machinery. Make sure you install the air cooler in the perfect location, it will cool down the temperature enough while providing cool air to everyone in the room.